Glue for PLA

This is the building forum for the Combat Boat 90. If you are interested in the STL's for this project, they are available to those who help me by contributing 15 Euro. Then you get access to a sub-forum where STL's, instructions and mods are located.
User avatar
Posts: 10
Joined: Fri Aug 14, 2020 6:09 am
Location: Gedser, Denmark

Glue for PLA

Postby vandborg » Fri Aug 14, 2020 7:06 am

Hi Guys

I have used this glue for the last 3 years and it works perfectly. It melts the PLA and make a very stong connection. I have build large objects (1/6 scale tanks) with this glue without any problems. ... 339ddb1fda


Site Admin
Posts: 435
Joined: Thu Jan 11, 2018 7:46 pm

Re: Glue for PLA

Postby admin » Fri Aug 14, 2020 8:28 am

That is interesting! thanks for posting! I have generally used CA-glue, and although it sticks very well it creates a very hard joint that can crack if overloaded. I've also experimented a bit with friction stir welding, that can work although it's obviously hard to make a deep joint and also hard to make the joint flush.

Who is online

Users browsing this forum: No registered users and 1 guest