How to get the STL's

This is the building forum for the Combat Boat 90. If you are interested in the STL's for this project, they are available to those who help me by contributing 15 Euro. Then you get access to a sub-forum where STL's, instructions and mods are located.
tommy408
Posts: 4
Joined: Wed Jan 24, 2018 3:13 am

How to get the STL's

Postby tommy408 » Thu Feb 15, 2018 4:00 pm

I've been on the look out for a good hull to print after printing up the Hamilton style Jet Drive units.
Looked on all the usual sites and found nothing suitable till i hit on this.
Problem is I can't seem to find the project stl's.
Can someone provide a link ?
cheers.
Attachments
21244615_1432960163426383_1008698168_n.jpg
21244615_1432960163426383_1008698168_n.jpg (70.06 KiB) Viewed 21667 times

tommy408
Posts: 4
Joined: Wed Jan 24, 2018 3:13 am

Re: stl's?

Postby tommy408 » Fri Feb 16, 2018 3:38 pm

Ok, just found out how to get the files, but can'y see how to contact admin.
any chance Admin could send me an email to discuss payment for the stl's?
cheers.

admin
Site Admin
Posts: 429
Joined: Thu Jan 11, 2018 7:46 pm

Re: stl's?

Postby admin » Mon Feb 19, 2018 9:43 pm

I sent an email to the registered email address to your profile.

Haoleboy
Posts: 3
Joined: Sat Feb 03, 2018 8:45 pm

Re: stl's?

Postby Haoleboy » Fri Feb 23, 2018 9:32 am

Hello,

I have sent several messages as well, how do I make payment to get access to the STL's?

Kind regards,

Chris

admin
Site Admin
Posts: 429
Joined: Thu Jan 11, 2018 7:46 pm

Re: stl's?

Postby admin » Sat Feb 24, 2018 8:59 am

That's super weird. I've gotten PM's from other users without problem, did you get an error message? Also, I have no emails in my junk-box, have you tried to email me as well without success? olle.skold (at) lightsource.se

tommy408
Posts: 4
Joined: Wed Jan 24, 2018 3:13 am

Re: stl's?

Postby tommy408 » Sun Feb 25, 2018 6:14 pm

£30 sent via paypal, wasn't sure about the price but I remember it being around 30Euros and had no other option on paypal site to send currency except Sterling.

admin
Site Admin
Posts: 429
Joined: Thu Jan 11, 2018 7:46 pm

Re: stl's?

Postby admin » Sun Feb 25, 2018 6:30 pm

It was €15 so I sent back the rest. :) Added you to the group now.

Pz212
Posts: 1
Joined: Thu Mar 01, 2018 6:11 pm

Re: stl's?

Postby Pz212 » Thu Mar 01, 2018 6:13 pm

Hi.
I am also unable to send you a pm? Feel free to email me the payment info

admin
Site Admin
Posts: 429
Joined: Thu Jan 11, 2018 7:46 pm

Re: stl's?

Postby admin » Mon Mar 19, 2018 4:10 pm

To anyone who reads this, I have now fixed a setting in the board that prevented newly registered users to send PM's. I guess it's in place to prevent spamming, but in this case it was just creating problems. Now anyone can send PM directly so should work fine now.

RICARDO YAÑEZ
Posts: 1
Joined: Sun Jun 17, 2018 4:49 pm

Re: stl's?

Postby RICARDO YAÑEZ » Sun Jun 17, 2018 5:01 pm

Hello I just registered, you can send me mail with purchase information of the model.

Thank you


Who is online

Users browsing this forum: No registered users and 2 guests