my dutch version of the cb 90

This is the building forum for the Combat Boat 90. If you are interested in the STL's for this project, they are available to those who help me by contributing 15 Euro. Then you get access to a sub-forum where STL's, instructions and mods are located.
windsurfer1979
Posts: 17
Joined: Tue Apr 13, 2021 12:52 pm

my dutch version of the cb 90

Postby windsurfer1979 » Sat May 01, 2021 10:27 am

hello there from holland
for almost 5 or 6 years I wanted to build this ship but after seeing the price of a billing boats cb90 I thought wow to expensive.
so I dropped the idea then. after a few years the 3d printers went from expensive to a bit better priced.
2 years ago I was for my old job a couple of times in Sweden and see a few times the cb90. and I fall in love again.

so recently I bought a ender5 pro
and the stls here and started printing. after tuning and fine tuning the printer and a roll of black filament gone I ordered metal grey filament.
so here is hull part 1 printed
Image

windsurfer1979
Posts: 17
Joined: Tue Apr 13, 2021 12:52 pm

Re: my dutch version of the cb 90

Postby windsurfer1979 » Sat May 01, 2021 10:32 am

here is the roof of the bridge (note: the parts are just from the printer when the pictures)



Image

windsurfer1979
Posts: 17
Joined: Tue Apr 13, 2021 12:52 pm

Re: my dutch version of the cb 90

Postby windsurfer1979 » Sat May 01, 2021 10:34 am

some jet parts.

inserts are on the way.
maybe in the future I go for a 150 procent cb90 just to make the parts more easy to put together and with normal size screws and bolts like m3 or m4

Image

admin
Site Admin
Posts: 429
Joined: Thu Jan 11, 2018 7:46 pm

Re: my dutch version of the cb 90

Postby admin » Mon May 03, 2021 4:44 pm

thanks for posting! :) Are you going to keep it in the printed color or paint it?

windsurfer1979
Posts: 17
Joined: Tue Apr 13, 2021 12:52 pm

Re: my dutch version of the cb 90

Postby windsurfer1979 » Mon May 17, 2021 3:32 pm

I keep it like the ducht navy colours.

and some changes with moving parts

windsurfer1979
Posts: 17
Joined: Tue Apr 13, 2021 12:52 pm

Re: my dutch version of the cb 90

Postby windsurfer1979 » Sat May 22, 2021 12:01 pm

Image
so after a few weeks testing different pla.
i made the complete hull again but better at this moment

windsurfer1979
Posts: 17
Joined: Tue Apr 13, 2021 12:52 pm

Re: my dutch version of the cb 90

Postby windsurfer1979 » Mon May 24, 2021 11:57 am

after some printing and assembly off the hull I found a laser liner with self levelling modus
Attachments
IMG_0349.JPG
IMG_0349.JPG (1.95 MiB) Viewed 627 times
IMG_0348.JPG
IMG_0348.JPG (2.2 MiB) Viewed 627 times
IMG_0347.JPG
IMG_0347.JPG (2.07 MiB) Viewed 627 times


Who is online

Users browsing this forum: No registered users and 2 guests