200% SB90 on a Creality Ender 3

This is the building forum for the Combat Boat 90. If you are interested in the STL's for this project, they are available to those who help me by contributing 15 Euro. Then you get access to a sub-forum where STL's, instructions and mods are located.
Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Tue Apr 27, 2021 8:48 pm

Yes, and I absolutely love this model. It gets tons of compliments even in its unfinished state. I've been playing with the Jetpumps more reshaping the reverse buckets and refining the mating area between the pump and steering nozzle.
Attachments
Improved Pump Stator v10.png
Improved Pump Stator v10.png (174.82 KiB) Viewed 2023 times
Improved Pump Stator v10.1.png
Improved Pump Stator v10.1.png (217 KiB) Viewed 2023 times
Improved Pump Stator v9.jpg
Improved Pump Stator v9.jpg (39.88 KiB) Viewed 2023 times

Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Wed Apr 28, 2021 1:50 pm

Some side by side comparisons of the new pump and reverse buckets. I’m hoping to get it all assembled for a water test while I’m printing all the detail items.
Attachments
8963607C-715F-4C74-B430-5D3192537860.jpeg
8963607C-715F-4C74-B430-5D3192537860.jpeg (2.31 MiB) Viewed 2022 times
FE085B7D-12E1-46DD-899E-209F2A5303E3.jpeg
FE085B7D-12E1-46DD-899E-209F2A5303E3.jpeg (2.07 MiB) Viewed 2022 times
E32C5901-AECE-4CC4-9DE2-CA68CDB117DE.jpeg
E32C5901-AECE-4CC4-9DE2-CA68CDB117DE.jpeg (2.08 MiB) Viewed 2022 times
6AA7B2E7-AA62-470C-B137-C0D293E4CC73.jpeg
6AA7B2E7-AA62-470C-B137-C0D293E4CC73.jpeg (2.66 MiB) Viewed 2022 times
B8D459C4-1CE3-486A-96F3-68EF4FF8B10E.jpeg
B8D459C4-1CE3-486A-96F3-68EF4FF8B10E.jpeg (2.52 MiB) Viewed 2022 times
140537B1-802B-418F-AB57-82D6C6EFB6BA.jpeg
140537B1-802B-418F-AB57-82D6C6EFB6BA.jpeg (2.63 MiB) Viewed 2022 times

windsurfer1979
Posts: 17
Joined: Tue Apr 13, 2021 12:52 pm

Re: 200% SB90 on a Creality Ender 3

Postby windsurfer1979 » Mon May 17, 2021 3:36 pm

can you share the updates from the jet pump? for easier assembly?

Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Fri May 21, 2021 11:13 pm

windsurfer1979 wrote:
Mon May 17, 2021 3:36 pm
can you share the updates from the jet pump? for easier assembly?
The first version is available in the same location as the other STLs. I’m still working on the current version but they will be put there soon. As a reminder these are 200% of the original so you would need to scale to 50% in your slicer for the original size of the model.


Who is online

Users browsing this forum: No registered users and 2 guests