200% SB90 on a Creality Ender 3

This is the building forum for the Combat Boat 90. If you are interested in the STL's for this project, they are available to those who help me by contributing 15 Euro. Then you get access to a sub-forum where STL's, instructions and mods are located.
Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Tue Dec 10, 2019 12:42 am

New pumps are assembled and installed. I’ve added the reverse bucket mounts. I’ve taken some videos of the tests. Once I get them uploaded to YouTube I’ll attach the link here.
Attachments
6DF234F0-3340-453A-97BA-A90F0CC95240.jpeg
6DF234F0-3340-453A-97BA-A90F0CC95240.jpeg (3.09 MiB) Viewed 10588 times
FD097F3B-4EDE-45EC-8201-FD7F0AD429F5.jpeg
FD097F3B-4EDE-45EC-8201-FD7F0AD429F5.jpeg (3.22 MiB) Viewed 10588 times
84FCAD37-DA3D-4B9B-B2FF-F0F2C28B5130.jpeg
84FCAD37-DA3D-4B9B-B2FF-F0F2C28B5130.jpeg (2.52 MiB) Viewed 10588 times
D13AC66F-2413-4455-A557-67B556B8A4B7.jpeg
D13AC66F-2413-4455-A557-67B556B8A4B7.jpeg (3.34 MiB) Viewed 10588 times

admin
Site Admin
Posts: 429
Joined: Thu Jan 11, 2018 7:46 pm

Re: 200% SB90 on a Creality Ender 3

Postby admin » Fri Dec 13, 2019 6:14 pm

Nice! cannot wait to see a crash stop from full speed! :D

Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Sat Dec 14, 2019 9:30 pm

I know its been much anticipated so here's a couple of links to some short videos of the boat. Sorry in advance for the shaky video but the wife was holding our 11 month old son as well. He really wanted to go for a swim.

https://youtu.be/38vHx00m39U

https://youtu.be/shN-ze7q8rc
Attachments
1BC525BB-1CD7-4161-B090-6600A4F9FFC7.jpeg
1BC525BB-1CD7-4161-B090-6600A4F9FFC7.jpeg (5.06 MiB) Viewed 10581 times
37F1E58A-6963-4C8C-9F3B-879F31A2B47C.jpeg
37F1E58A-6963-4C8C-9F3B-879F31A2B47C.jpeg (5.51 MiB) Viewed 10581 times
168D69AE-BC9F-4B6E-8433-DAD235030F4C.jpeg
168D69AE-BC9F-4B6E-8433-DAD235030F4C.jpeg (4.66 MiB) Viewed 10581 times

Matsa
Posts: 32
Joined: Tue May 22, 2018 10:46 am

Re: 200% SB90 on a Creality Ender 3

Postby Matsa » Tue Feb 04, 2020 2:10 pm

Hows it goin? 8-)

Matsa...

Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Thu Feb 06, 2020 12:15 am

Pretty slow Matsa, I haven’t made any progress since the test run but I do still plan on getting her done.

User avatar
vandborg
Posts: 10
Joined: Fri Aug 14, 2020 6:09 am
Location: Gedser, Denmark

Re: 200% SB90 on a Creality Ender 3

Postby vandborg » Sat Aug 15, 2020 8:27 am

Hi Kylecox
Is it possible that you want to share your STL's for your updated water jets. I myself have started building a 200% boat.
Kind regards
Torben

Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Sat Aug 29, 2020 9:06 pm

vandborg wrote:
Sat Aug 15, 2020 8:27 am
Hi Kylecox
Is it possible that you want to share your STL's for your updated water jets. I myself have started building a 200% boat.
Kind regards
Torben
I will upload them as soon as I get a chance. Unfortunately I haven’t messed with my build since the test runs of the new pump designs.

Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Wed Sep 02, 2020 5:42 pm

vandborg wrote:
Sat Aug 15, 2020 8:27 am
Hi Kylecox
Is it possible that you want to share your STL's for your updated water jets. I myself have started building a 200% boat.
Kind regards
Torben
I uploaded the pumps in the STL section. Just look for the 200% Jet pumps.

Kylecox1019
Posts: 44
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Sun Apr 25, 2021 6:26 pm

Well it’s been a while but I’ve decided to start back at this monster. I decided to design some cradles to hold it level on the work bench. I wanted something for the 200% that could be printed in one piece. I’ll upload the files when I get a chance.
Attachments
CB30B728-18E5-40BE-897B-9300BE703BE0.jpeg
CB30B728-18E5-40BE-897B-9300BE703BE0.jpeg (1.4 MiB) Viewed 1651 times
E7187FA9-EC85-427F-B828-26AA7E202715.jpeg
E7187FA9-EC85-427F-B828-26AA7E202715.jpeg (696.44 KiB) Viewed 1651 times

admin
Site Admin
Posts: 429
Joined: Thu Jan 11, 2018 7:46 pm

Re: 200% SB90 on a Creality Ender 3

Postby admin » Tue Apr 27, 2021 6:16 pm

Nice! glad to hear you're on the project again! :) I know exactly how it is, some projects needs to do a bit of shelf time until the inspiration and other parameters are right.


Who is online

Users browsing this forum: No registered users and 3 guests