Search found 124 matches

by iwannabetheguy1980
Tue Nov 30, 2021 9:31 pm
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

they are meant to snap off.
put a plier inside to the cut line then move the plier quickly and it will snap.
by iwannabetheguy1980
Mon Nov 29, 2021 8:20 pm
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

That is the wrong part if you are constructing my version.

see my manual page 16. in my version the wheel rims carry the bearings.

Otherwise if you are constructing the original version there are different bearing options for the front uprights.

my version is different then olle's
by iwannabetheguy1980
Fri Nov 19, 2021 4:13 am
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

the clear parts, its a nightmare..... the way i did it.... 1) you need rubber gloves. because it keeps you from getting your finger print oil all over everything. wear the gloves the entire time there are also Cotton gloves designed for this purpose tamiya sells them or you might find them on amazon...
by iwannabetheguy1980
Mon Nov 15, 2021 1:56 am
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

i don't plan to make any changes. my cars still drive properly I have not broken anything after the last revisions back in June when i posted the STLS. I didn't release any MMU parts because they are difficult to setup in the slicer plus you need a MMU to use them anyway. not many people have comple...
by iwannabetheguy1980
Sun Nov 14, 2021 3:08 am
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

you know i realized i made a handbrake forgot all about it because i was messing around with my MMU at the time. if you look in my version of the modifications sub forum its located inside my part one files, go into the "new core" folder and its "Parking Brake.stl" looks like this https://i.imgur.co...
by iwannabetheguy1980
Wed Nov 10, 2021 5:36 pm
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

some people also put a led in the brake lever hole to light up the console.

i never bothered to install full led light, just the main headlight led without the fiber optics.
by iwannabetheguy1980
Wed Oct 27, 2021 5:07 pm
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

i do not run 11 volts (3S), 7.4 volts is fine. for the ESC setting you will have to decide what works best for you, the defaults are not good once you start to tune. you need more drag brake and more brake and more initial brakes. reduce the punch setting soft as a starting point. reverse speed is f...
by iwannabetheguy1980
Tue Oct 26, 2021 9:21 pm
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

=== 1. Servo: can I use instead "Corona DS-843MG" other servo, like "ES08MA II (Size: 23x11.5x24mm)", which is a little wider (will it fit to modified servo housing) === i don't know, you will have to see if it fits in the provided STLs or requires modification. the servo position is important becau...
by iwannabetheguy1980
Mon Oct 25, 2021 4:49 pm
Forum: Koenigsegg Agera RS
Topic: iwannabetheguy1980's build
Replies: 144
Views: 30967

Re: iwannabetheguy1980's build

they are accessible after donation to these forums contact admin.
by iwannabetheguy1980
Mon Oct 18, 2021 3:41 am
Forum: Koenigsegg Agera RS
Topic: Johannes iwannabetheguy1980 modification build
Replies: 7
Views: 3928

Re: Johannes iwannabetheguy1980 modification build

i actually took one of mine out on Saturday and put a pack through my white chassis. Mine is still holding up no more broken parts everything is PLA+ except for the pinion gear which is PC BLEND. silicon cast tires are still fine. i have to give the body a bath the white just gets REALLY dirty. i sh...