Search found 304 matches

by admin
Thu Aug 19, 2021 8:15 pm
Forum: OS Railway 3D-printed railway
Topic: Motor trolley belts - Cinghie carrello motore
Replies: 1
Views: 182

Re: Motor trolley belts - Cinghie carrello motore

Hi!

Those are O-rings. I bought a box full of different sizes in my local hardware store, it has been very useful for different projects! If you want to purchase a specific size only, I would suggest eBay.
by admin
Thu Jul 22, 2021 4:35 pm
Forum: Combat boat 90 (Stridsbåt 90)
Topic: CB90 1/16
Replies: 2
Views: 541

Re: CB90 1/16

Nice! Look forward to see the result when you print it! :) Regarding drawing, I used some 3-views I found on the net and together with pictures I've gathered, so no detailed drawings.
by admin
Thu Jul 22, 2021 4:34 pm
Forum: Koenigsegg Agera RS
Topic: About the project - How to get STL's
Replies: 31
Views: 51372

Re: About the project - How to get STL's

Sent PM, let me know if you didn't receive it.
by admin
Tue Jun 22, 2021 7:15 am
Forum: OS Railway 3D-printed railway
Topic: alternative sparkfun board
Replies: 6
Views: 1038

Re: alternative sparkfun board

Hi,

Sorry it took a while for me to respond, glad you found the cause! go over the gears with a file or a piece of sand paper and make sure they are not sitting too tight.
by admin
Tue Jun 22, 2021 7:11 am
Forum: Koenigsegg Agera RS
Topic: Car and combat model
Replies: 1
Views: 234

Re: Car and combat model

hi!

Car is OK with that printer, but for the CB90 you need to divide the grab rails.

Best Regards
/Olle
by admin
Sat Jun 19, 2021 8:11 am
Forum: OS Railway 3D-printed railway
Topic: alternative sparkfun board
Replies: 6
Views: 1038

Re: alternative sparkfun board

Hi! Which motor do use?
by admin
Wed Jun 16, 2021 8:50 am
Forum: OS Railway 3D-printed railway
Topic: ICE Parts to be glued
Replies: 1
Views: 190

Re: ICE Parts to be glued

hi!

Yes all of those are supposed to be glued together, as you can access the interior even after they are glued. However I suggest that if you plan to install LED's, do that before you glue the sections together.
by admin
Thu Jun 10, 2021 6:40 am
Forum: OS Railway 3D-printed railway
Topic: alternative sparkfun board
Replies: 6
Views: 1038

Re: alternative sparkfun board

Hi! I have not tried that one, but from what I can see it should work just as fine as the Sparkfun board I've used! Nice that it has an onboard 5V supply, that can be handy! The functionality seems to be very similar.
by admin
Wed Jun 09, 2021 4:17 pm
Forum: Combat boat 90 (Stridsbåt 90)
Topic: Olles CB90
Replies: 20
Views: 23742

Re: Olles CB90

My hull was water tight right after printing. I sealed any leftover gaps in the glue joints with epoxy as I put a thin strip of carbon fiber cloth over the seam to reinforce it. If you get leaks through the hull I would suggest coating the hull with a couple of layers of primer and then a couple of ...
by admin
Wed Jun 02, 2021 6:17 pm
Forum: OS Railway 3D-printed railway
Topic: ELECTRICAL LOCO PRINT HELP
Replies: 3
Views: 473

Re: ELECTRICAL LOCO PRINT HELP

Which locomotive is it? If it is the Hectorrail 141, I suggest to divide the main body not in the center but a bit off-center so that the joint is not at the same position as the joint of the chassis. When you glue it together, use a bit of glass fiber tape or a piece of glass fiber cloth on the ins...